Add Bookmark | Recommend this book | Back to the book page | My bookshelf | Mobile Reading

Free Web Novel,Novel online - All in hlnovel.com -> Romance -> take off my aviation age

Chapter 953 It¡¯s all pure profit

Previous page        Return to Catalog        Next page

    Yes, it¡¯s really beautiful.

    ¡°On the work plate in the center of the machine tool, a face gear rough processing piece with a diameter of about 400mm is fixed. As the worker inputs the program on the PC control terminal next to it, he presses the start button.

    A probe-like thing popped out quickly, touched the serrations of the face gear back and forth a few times, and then retracted it. Then the PC control terminal displayed the basic parameters of the face gear, and quickly calculated the gap between the grinding wheel and the face gear.  Optimal contact angle and distance.

    After the worker clicks OK, the worm grinding wheel equipped with concave and convex diamonds in the machine tool quickly gilds the face gear with the adjusted processing angle.

    The next moment, the grinding head and the workbench rotate at the same time, accompanied by a waterfall of coolant pouring down. The concave and convex edges on the grinding head of the worm grinding wheel mesh perfectly with the saw teeth on the face gear. As the equipment rotates at high speed  , the gears are repeatedly finely ground.

    However, just when everyone thought that this was the end of the machine tool, a magical scene appeared. The worm grinding wheel grinding head suddenly stopped operating and separated from the processing interface. At the same time, another rotating grinding head moved out from the inside of the machine tool.  , equipped with a round cake-shaped grinding wheel.

    At this time, the angle of the workbench changes again, allowing the round cake-shaped grinding wheel to engage with the saw teeth of the gear. When the grinding wheel rotates, the workbench does not follow the rotation, but makes a curved up and down rhythm with the gear.  A more detailed grinding.

    At the same time, two high-speed rotating tools around the removed worm grinding wheel began to modify the worm grinding wheel so that it could be closer to the fit of the face gear after fine grinding.

    After the fine grinding comes to an end, the worm grinding wheel is also readjusted, and the two grinding heads are replaced again.

    Repeated this several times, the originally dull face gear has become as shiny as new after several rounds of precise polishing. The alluring metallic luster makes each saw tooth look like a work of art, making people unable to put it down.  visual sense.

    At this time, something like a probe popped up in the machine tool again, close to the face gear that had just been processed. This time the probe did not move, but the face gear rose and fell with the workbench, sometimes moved, sometimes rotated, and sometimes  Diagonally, after about ten minutes, the probe was retracted, and the entire processing process officially ended.

    The army leaders, including Meng Qingguo, saw their hearts surging and their blood boiling.

    There is no way, this kind of powerful industrial beauty can only be felt by immersing yourself in the unique charm of the blend of aesthetics and mechanics, especially the moment when the coolant pours down, the indescribable feeling of pleasure,  It's really fascinating.

    Of course, what¡¯s more important is that the lucky and flowing process is so comfortable that even patients with severe obsessive-compulsive disorder can¡¯t fault it at all.

    "Not bad¡­¡­"

    Seeing such a perfect process, the head of the headquarters gave a rare nod of admiration. He immediately turned his head and prepared to give Zhuang Jianye a few words of encouragement. When his eyes glanced at Zhuang Jianye, he suddenly found a workshop staff handing over a few pieces of paper.  The words of encouragement were immediately replaced by curious inquiries: "Xiaozhuang, what is that in your hand?"

    ¡°Oh, it¡¯s the inspection report of the face gear that was just processed.¡±

    Zhuang Jianye¡¯s voice was not loud, but he heard a thunderous explosion in the ears of the leaders. You know that the face gear components that had just been processed were still lying on the workbench, so how could a test report be issued?

    Could it be that an invisible person came here to do the test?

    How can it be!

    "Lao Meng, take a look."

    The head of the headquarters took the test report handed over by Zhuang Jianye, glanced at it twice, and handed it to Meng Qingguo, who looked in disbelief. Meng Qingguo took it in his hand, frowned and read it several times without saying anything, looking at it with a look of ghost.  The face gear on the workbench was missing for several times.

    This was repeated several times until the head of the headquarters became impatient and urged: "Lao Meng, please speak up. Is it a test report?"

    "It's it's a test report, not only" At this point, Meng Qingguo swallowed a mouthful of saliva, looked at the gear on the workbench again, and said with some difficulty: "And the data is very detailed, professional experiments from the Advanced Research Institute  The room is no better than this level.¡±

    As soon as these words came out, the surrounding army leaders all took a breath. No one came to test it, so forget it. The measurement accuracy is comparable to the professional laboratory of an advanced research institution. How did Ascendas Group do it?

    "Comrade Zhuang Jianye, I didn't see you have a measurement room here, but your report"

    The leaders of each army have doubts in their minds, but they can still bear it. Meng Qingguo doesn¡¯t have the energy to nourish his energy. He has only one bearing and one gear.?Those are the two most commonly used parts of helicopters.

    Now that the Xiangzhou factory of the Ascendas Group has mastered the production process of advanced gears, this is by no means good news for the porcelain capital and Binjiang. Therefore, Meng Qingguo no longer cares about the problem of whether to choose the quantity or not to mass-produce, or whether it will be cost-effective. He will focus on the immediate matters first.  Let¡¯s find out more.

    So Meng Qingguo couldn¡¯t wait to ask the questions of everyone present. However, before he could finish his words, Zhuang Jianye interrupted him with a smile: ¡°Isn¡¯t this an obvious thing?¡±

    As he said that, he pointed to the nb-404 CNC worm grinding machine in front of him: "Just let the machine detect whether it is working by itself."

    "Let the machine detect it by itself?"

    Meng Qingguo was a little confused after hearing this, but Zhuang Jianye pointed to the two retracted probes in the machine tool and said: "Of these two probes, the one on the left is a positioning probe, which is used to measure the position of the workpiece before processing.  This determines the angle of processing, the distance of fine grinding and the intensity of grinding.

    The one on the right is the measurement probe. Together with the surrounding laser positioners, it can accurately measure the accuracy of the workpiece. If it meets the standards, it will be sent back to the computer and terminal through the communication line, and a test report will be issued and archived for future use; if not,  If it is qualified, it will continue to be processed until it is qualified"

    Taking this as an opportunity, Zhuang Jianye began to give a comprehensive introduction to the nb-404 CNC worm grinding gear grinding machine. If the gear grinding equipment in the United States is unique in the world and one company is the only one, then the nb-404 CNC worm grinding gear grinding machine cannot be compared.  There are products from American friends, but the gap is not as big as imagined.

    It¡¯s nothing more than the American friend¡¯s worm grinding wheel. The tooth head of the round cake grinding wheel is all squared; the nb-404 CNC worm grinding wheel gear grinding machine is not so free and easy, and needs to be divided into two to achieve it.

    In addition, the nb-404 CNC worm gear grinding machine is not much worse than the products of American friends in terms of accuracy, efficiency and even operating costs.

    If this were not the case, how could Ascendas Group dare to apply face gear coaxial torque splitting technology on the Z-12pro exported to Pakistan?

    ¡°In the final analysis, Ascendas Group has the confidence to achieve true industrial mass production of this technology.

    After listening to Zhuang Jianye's introduction, all the army leaders were extremely excited. Although Meng Qingguo was not excited, he was equally happy for the achievements of the Xiangzhou Factory. However, he quickly thought of another question and frowned and asked: "Comrade Zhuang Jianye,  You should have invested a lot in developing the nb-404 CNC worm grinding machine, right? When is the cost expected to be recovered?"

    Zhuang Jianye¡¯s smile became even brighter: ¡°The cost has been recovered, and everything produced now is pure profit!¡±

    If you like Soar My Aviation Age, please collect it: Soar My Aviation Age is updated the fastest.  (Remember the website address: www.hlnovel.com
Didn't finish reading? Add this book to your favoritesI'm a member and bookmarked this chapterCopy the address of this book and recommend it to your friends for pointsChapter error? Click here to report