Add Bookmark | Recommend this book | Back to the book page | My bookshelf | Mobile Reading

Free Web Novel,Novel online - All in hlnovel.com -> Romance -> take off my aviation age

Chapter 43 Core Technology

Previous page        Return to Catalog        Next page

    He did what he said, so he immediately rummaged through various filing cabinets. Not to mention, he found a lot of technical information about the surveying and mapping of high-power turbofan engines back then.

    Although these data are no longer complete, they still have strong reference significance. For example, a turbine survey drawing found from a pile of tooling drawings describes the turbine situation of the modified turbofan engine in quite detail;  The analytical data found in some material materials clearly express the alloy composition of the engine.

    There was a lot of similar information. Zhuang Jianye searched for it for two whole days with an unsatisfied passion, and actually collected a lot. However, after sorting it out, he found that the information was not systematic at all. It was just like plaster, with pieces here and there.  .

    There is no way, the systematic information has been sent to City H ten years ago. What can be left is either the scrapped manuscript at that time or the initial data of the experiment. It is obviously impossible to use these things to build an engine, but it can be pieced together.  At the beginning, Yonghong Factory mapped the preliminary outline of the turbofan engine.

    Zhuang Jianye is not so bold as to want to build an engine. That is a matter for the director and secretary to consider. He just wants to restore the struggle of Yonghong Factory.

    ¡°It¡¯s just like sorting out the files of the J-6 fighter jet. There¡¯s so much information. Even if it¡¯s just unsystematic initial test data, it can¡¯t be completed overnight.

    Therefore, the enthusiasm that Zhuang Jianye finally ignited was exhausted after two days of burning, and he began to change from a single-minded specialization to a somewhat thoughtful balance.

    Anyway, the work of finishing files is still growing. Some of them are finishing. The key is to sort out the main data properly to cope with the inspection.

    When it comes to inspections, Zhuang Jianye has a bit of a headache. The new regulations of the ministry are extremely strict, requiring every archive document to be described in detail and marked with its source.

    If this was done more than 20 years later, there would be no problem. Even if it is not an electronic file on a computer, the paper data will still have rules to follow. However, Yonghong Factory was quite troubled during the special period, and many technical data were incomplete. If you want to achieve  The ministry's request is clearly impossible.

    For this reason, Zhuang Jianye went to Director Yan to report the situation. Director Yan took a look at the notice issued by the ministry and commission, and said something very stupid: "Look at what is missing, follow the example of the gourd, and just fill it in yourself."  , Can comrades in ministries and commissions read page after page? It¡¯s just passable.¡±

    Zhuang Jianye has wanted to do this for a long time, and now that the leader has said the same thing, he naturally nods and starts doing it when he gets back.

    But the problem is that to draw a gourd, you must have a gourd. If you don¡¯t have a gourd, what kind of gourd can you draw?

    What troubles Zhuang Jianye is this kind of information. There is not even a template for forgery. People want to destroy the information after looking at it. At this moment, Zhuang Jianye's idea pops up.

    There is such a document in the new process application file of the J-6 fighter. It says that Yonghong Factory improved the wing forming process and introduced shot peening technology to process the wings of the J-6 fighter. It has been theoretically proven that whether  The strength and structure are several times stronger than wing panels made by traditional processes.

    Based on this, the compiler of this process imagined a shot peening machine, believing that the shot peening machine is the key equipment for future wing molding. They also used a series of theoretical data to prove that this idea is quite correct. As for how the data came from,  How is the theory done and what is the machine like? Not even a word is written in the materials.

    If this were separate information, Zhuang Jianye would not hesitate to take it out and throw it into the trash can. The problem is that many of the subsequent tooling drawings were determined based on this idea. Without this information, if the leader makes a mistake,  What should I do when I see the tooling drawings at the back? I can¡¯t say that I made them up out of thin air.

    So this hole must be filled no matter what. The problem is that there is nothing to learn from this innovative new process application. What should I do?  Zhuang Jianye was helpless, went crazy, and pulled his hair.

    "If I had known this, why did I focus on the copper and aluminum tube process in the experimental department? It would be great to spend some time on the wing shot peening process.

    Wait a minute One of the three major research topics of the Experimental Section, wing shot peening is not just to fill this hole!

    The more Zhuang Jianye thought about it, the more it made sense, and then he started to curse. What was thought up by the old technical backbone of Yonghong Factory eight years ago is still a key research topic of the experimental department. At this snail-like speed, there is no fear of the old technical backbone returning.  A slap in the face from the factory?

    ¡°After all, it is also the core craft of wing manufacturing!¡±

    Zhuang Jianye looked at the cut-off technical information in his hand and chewed his teeth. He was annoyed at being picked peaches a few days ago, but was immediately defeated by the low efficiency in front of him.

    There is no other way but to bite the bullet and do it by yourself, who will let youThis is what happened. Fortunately, this is not really a new machine or a new process, it is just a written explanation. Zhuang Jianye feels that he can still do it with a little effort.

    So I bit my pen and thought about the shot peening machine I had seen in my previous life. Without stopping, I started to draw random sketches on the blank drawing paper, then compared it with the data that came out of the data, and revised it over and over again.  I don't know how long it took, but Zhuang Jianye finally breathed a sigh of relief and nodded with satisfaction: "Well~~This should be almost done."

    After saying that, he wrote a series of parameters on the drawing paper that he had drawn in a mess.

    In the next few days, Zhuang Jianye followed this set of parameters and helped his predecessors to build the shot peening machine that he had imagined. Then he looked at the technical information he had fabricated and felt proud.  He smiled and began to organize it into a volume, write a table of contents, and prepare to file it.

    While Zhuang Jianye was busy working alone, there was a sudden knock on the door of the archives room. Zhuang Jianye turned around and saw that it was Shi Jun who had not seen him for many days.

    Today's Shi Jun, like Zhuang Jianye, is a man of the hour in Yonghong Factory. However, compared to Zhuang Jianye's negative side, Shi Jun's positive side is a mess. In less than half a year, he published two papers on key equipment of the four branches.  It has carried out technical transformation and also solved the problem of the vertical tail rivet falling off of the J-6 fighter jet.

    In addition, Shi Jun also had unique insights in business management, and took the initiative to write letters to the factory party committee to offer suggestions, which were adopted by the factory party committee and also noticed by the factory director and secretary.

    Since then, Shi Jun has risen through the ranks. Not only was he promoted to the first batch of Zhuang Jianye, he was officially transferred to the first assembly workshop as the deputy director of the process room the next day, becoming the youngest full-time technical cadre since the establishment of Yonghong Factory.

    That¡¯s not all. I heard that the ministries and commissions came to the factory for inspection a few days ago. After listening to Shi Jun¡¯s personnel report, they made it clear that he would be included in the inspection list of the third-echelon cadres of the ministries and commissions.

    That is the inspection list of the ministry and commission. In comparison, the third echelon of Yonghong Factory is just scum.

    Therefore, Zhuang Jianye becomes a scumbag when compared with others!

    If you like Soar My Aviation Age, please collect it: Soar My Aviation Age is updated the fastest.  (Remember the website address: www.hlnovel.com
Didn't finish reading? Add this book to your favoritesI'm a member and bookmarked this chapterCopy the address of this book and recommend it to your friends for pointsChapter error? Click here to report