In the foundry workshop of the Sixth Branch Factory, Shen Jianwei stared at the work station where the improved rivet mold was replaced for more than an hour. He found that the request for money was exactly the same as what Peng Chuan and Master Cen said, and he immediately said with a smile: "Not bad, very good." good!"
After speaking, he turned to the administrative cadres of the branch factory who came with him and ordered: "Immediately report the situation of our branch factory to the chief engineer, factory director and the representatives of the military stationed in the factory. If possible, it is best to report the situation of our branch factory to Please invite a leader to our branch factory to help correct the problem."
Hearing that Director Shen wanted to invite the leaders of the main factory to come over, Master Cen reminded him worriedly: "Director, our tests have not been completed yet. Is it right to invite the leaders of the main factory to come over at this time"
"Old Cen, I know what you mean, but you also know that our branch factory needs a chance to boost morale. No matter what the future tests are, this time it has exceeded 600 times and is close to the level of 2,000 times. The increase in buckle is enough for us to show off by patting our chests."
Shen Jianwei didn't take it seriously. Compared with Master Cen who simply wanted to make a good product and took advantage of the opportunity to be reinstated, Shen Jianwei, the director of the branch factory, was much more complicated.
His reforms are struggling in the Sixth Branch Factory, hitting obstacles at every turn, and now it has reached a point where it is about to be broken up and reorganized by the main factory, which is really hard to accept for the face-saving Shen Jianwei.
If things should not be recognized for him, but did not expect that the mountains and rivers were doubtful, and Liu Dahua Huiming had another village.
What does this mean?
His reforms were not without merit, his persistence was still correct, and the experience he advocated still had strong vitality. Shen Jianwei, who was not lacking in responsibility and was extremely politically sensitive, immediately regarded the successful improvement of rivet molds as a model for his reform. For promotion, we should also make a big article on this basis to make a good reputation for ourselves.
So let alone inviting a few factory leaders, if possible, he would like to bring over the central leaders and praise the Sixth Branch Factory under his control as a genius.
Others didn't know Shen Jianwei's ambitious thoughts, but the factory director had spoken, and naturally he had to implement it seriously. So Building 9 of the main factory soon successfully improved the rivet mold of the Sixth Branch Factory, and the J-6 heat-resistant aluminum alloy rivet waste was The rate is controlled at 0.5%.
As the center of a large factory with more than 10,000 people, there are countless major events to deal with every day. Such sensational technological improvements in the branch factory will not shock Building 9 like an earthquake, but some people are still surprised.
For example, Qiao Chenyu, the director of the Technology Department, did not expect that the Sixth Branch Factory could improve the rivet mold with its own ability.
Others don¡¯t know, but he, the technical core of the factory, knows how serious the loss of technical personnel from the Sixth Branch has been in the past two years. His technical department alone accepted technicians from the Fifth and Sixth Branch who voluntarily transferred out of the Sixth Branch.
Under such circumstances, it is a miracle that the Sixth Branch Factory can independently complete technical improvements.
He Ming, the chief engineer, also thought it was a miracle. Originally, he was going to help the Sixth Branch Factory solve the technical problems of rivet molds after completing the two key projects in the factory, but he did not expect that the Sixth Branch Factory would solve the technical problems of rivet molds. The factory actually managed to get things done by relying on its own abilities.
This made He Ming both happy and relieved. He felt that Shen Jianwei was not as bad as the rumors, and he still had two skills. He used his own abilities to improve the rivet mold technology in such a difficult environment. If you do it well, you will be better than the vast majority of cadres in the factory who talk about reform but are silent about the four modernizations.
So when He Ming received the invitation from the Sixth Branch Factory, he didn¡¯t even refuse. He immediately agreed and took Qiao Chenyu to the Sixth Branch Factory after lunch.
When they entered the workshop, Shen Jianwei was pointing to several running cold heading equipment and introducing the improvement of rivet molds to an Air Force representative stationed in the factory.
¡° If He Ming and Qiao Chenyu were surprised, then the military representatives were truly delighted. Yonghong Factory¡¯s rivet rejection rate was high. It was not only the factory itself that was under pressure, but the military representatives stationed in the factory were also not relaxed.
The higher-ups wanted to change the manufacturer, but more than 20 years of military product production had created a huge inertia, and it was not easy to change, so they asked the military representatives stationed in the factory to strictly control the quality.
The military representatives stationed in the factory had no choice but to use the most primitive and stupid trick, organizing people to inspect rivets one by one. In this way, the quality of the rivets delivered to the troops passed the standard, but the Yonghong factory was a mess because it exceeded the standard. The high scrap rate, huge monitoring team and long inspection time have pushed the cost to an unprecedented height.
Of course, the military will not bear it, and it can only be borne by Yonghong Factory. Because of this, Yonghong Factory's Sixth Branch suffered very serious losses during this period. This means that Yonghong Factory has a big business and can afford to spend it. If it is replaced by other The factory has long since run out of underwear.
But even so, there was still a lot of criticism in the factory for being so strict with the military representatives, which made the relationship between the military and the local area not very harmonious.
Well now, the Sixth Branch Factory has created a new rivet mold through technological improvements, which not only greatly reduces the scrap rate, but also has a super long life and greatly reduces the manufacturing cost. Seeing that it no longer has to strictly supervise quality, the military The local relations have returned to harmony, and the representatives of the military stationed in the factory are sincerely happy.
I highly praised the spirit of self-reliance and independence of the Sixth Branch Factory.
At this time, He Ming and Qiao Chenyu came over, and the representative of the Air Force stationed in the factory even praised the Sixth Branch Factory in front of Chief Engineer He, and implicitly suggested that the factory should praise the Sixth Branch Factory.
He Ming was also very happy to receive the recognition from the army. Accompanied by Shen Jianwei, he watched the production process for a while and briefly understood the improvement. He Ming asked with interest: "Is the improved technology originally there? Take it. show me."
"Here, here, here!" Shen Jianwei did not expect that the Federation of Trade Unions would come in person, and some people went crazy in excitement.
I just thought that the improvement of rivet molds was a great initiative. Without looking into the reasons, I invited the leaders to "guide the work". How could I not be satisfied when the chief engineer wanted to improve the process? , so he quickly looked back at Peng Chuan: "Xiao Peng, where is the improved process you made? Bring it over quickly and show it to the chief engineer to see if there is room for further improvement."
Peng Chuan's face was a little bitter. He never expected that Zhuang Jianye's perfunctory improvement process was really successful. Originally, he wanted to wait until the experiment was completely completed and fully understand the technical performance of the improved rivet mold before looking for an opportunity. Tell Director Shen about Xiazhuang Jianye.
Director Shen couldn't wait for even a moment, so he attracted a large number of big guys to watch. Peng Chuan was smart, but he had never seen such a big battle. He didn't know what to do for a while, so he thought about it. Besides, I didn¡¯t expect the chief engineer to come over and ask for the original craftsmanship.
Peng Chuan was a little uneasy, not knowing how to answer when the chief engineer asked him.
"Xiao Peng, what are you doing standing still? Hurry up and get the original document."
Seeing that Peng Chuan remained motionless for a long time, Shen Jianwei's face sank. Peng Chuan reacted quickly without caring about anything else, and handed Zhuang Jianye's four-sentence improvement process from the document bag to He Ming.
When He Ming received it, he looked a little strange: "Old Shen, did you make this?"
If you like Soar My Aviation Age, please collect it: Soar My Aviation Age is updated the fastest. (Remember the website address: www.hlnovel.com